[. . . ] USING FOR THE FIRST TIME • Before using your appliance for the first time, clean all the accessories (C, D, E, F) in warm soapy water, except for the motor unit (A). CAUTION: The blades are extremely sharp; handle them with caution when using or cleaning the appliance. € Make sure all the packaging has been removed before operating the appliance. [. . . ] ) • With the spice grinder (E) you can grind spices in a few seconds: coriander seeds, pepper, etc. € These accessories are equipped with a bowl (F) that prevents access to the blades during use. 2- Position the gasket (d1) or (e1) in its recess on the blade unit (d2 or e2). Position the blade unit on the bowl aligning both the marks on the bowl and the blade unit. Lock the accessory by rotating the blade unit through a quarter turn in the anticlockwise direction. 3- Rotate the assembled assembly (D or E) and position it on the motor unit. (Fig 6 - position 1) 4- Then rotate the assembled accessory (D or E) through a quarter turn clockwise until the green lock (closed) appears. 5- Plug in the appliance and turn the speed selector (B) to the desired position or apply a few pulses. To stop the appliance, turn the speed selector (B) back to position “0”. 6- Unlock the accessory by rotating it through a quarter turn in the anticlockwise direction, until the appears. Red lock (open) Remove the assembled accessory (D, E) from the motor unit. Turn it over on the worktop before unlocking the blade unit (d2, e2) from the bowl (F) in the reverse order of the assembly. * The colour of the bowl may change after blending certain very hard ingredients: (cloves, cinnamon, etc. ) 40 g 1 rusk 60 g 60 g 10 g 40 g Operating time 3 s / speed 2 10 seconds per pulse 6 sec / speed 1 30 seconds per pulse In pulses 30 sec / speed 2 Accessory D D D D D E CLEANING YOUR APPLIANCE • Unplug the appliance and remove the accessories • Handle them with caution: the blades on the blender jug and accessories are sharp. € For easy cleaning, be sure to wash the removable parts in water and a little washing-up liquid immediately after use. € To clean the blender jug (C) easily, unlock the blade unit (c1) by rotating it through a quarter turn in the anticlockwise direction. [. . . ] Add liquid Reposition the gasket, the 3 folds should be visible as shown in Fig. Impossible to lock the blade unit with the gasket (c1+c2) on the jug (c3). The blender jug gasket (c2) is not positioned correctly or is missing. [. . . ]